Verify a drive firmware update

After you update the drive firmware in a node, confirm that the firmware is updated properly and that the affected drives are operating correctly.

Procedure

  1. Ensure that no drive firmware updates are currently in progress by running the following command:
    isi devices drive firmware update list
    If a drive is currently being updated, [FW_UPDATE] appears in the status column.
  2. Verify that all drives have been updated by running the following command:
    isi devices drive firmware list --node-lnn all
    If all drives have been updated, the Desired FW column is empty.
  3. Verify that all affected drives are operating in a healthy state by running the following command:
    isi devices drive list --node-lnn all
    If a drive is operating in a healthy state, [HEALTHY] appears in the status column.