Drive firmware status information

You can view information about the status of the drive firmware through the OneFS command-line interface.

The following example shows the output of the isi devices drive firmware list command: 

your-cluster-1# isi devices drive firmware list
Lnn  Location  Firmware  Desired  Model
------------------------------------------------------
2    Bay  1    A204      -        HGST HUSMM1680ASS200
2    Bay  2    A204      -        HGST HUSMM1680ASS200
2    Bay  3    MFAOABW0  MFAOAC50 HGST HUS724040ALA640
2    Bay  4    MFAOABW0  MFAOAC50 HGST HUS724040ALA640
2    Bay  5    MFAOABW0  MFAOAC50 HGST HUS724040ALA640
2    Bay  6    MFAOABW0  MFAOAC50 HGST HUS724040ALA640
2    Bay  7    MFAOABW0  MFAOAC50 HGST HUS724040ALA640
2    Bay  8    MFAOABW0  MFAOAC50 HGST HUS724040ALA640
2    Bay  9    MFAOABW0  MFAOAC50 HGST HUS724040ALA640
2    Bay 10    MFAOABW0  MFAOAC50 HGST HUS724040ALA640
2    Bay 11    MFAOABW0  MFAOAC50 HGST HUS724040ALA640
2    Bay 12    MFAOABW0  MFAOAC50 HGST HUS724040ALA640
------------------------------------------------------
Total: 12

Where:

LNN
Displays the LNN for the node that contains the drive.
Location
Displays the bay number where the drive is installed.
Firmware
Displays the version number of the firmware currently running on the drive.
Desired
If the drive firmware should be upgraded, displays the version number of the drive firmware that the firmware should be updated to.
Model
Displays the model number of the drive.
Note Image

The isi devices drive firmware list command displays firmware information for the drives in the local node only. You can display drive firmware information for the entire cluster, not just the local cluster, by running the following command:

isi devices drive firmware list --node-lnn all